Superstructure turning speed | 9.5 1/min |
Travel speed | 2.9 mph / 4.7 km/h |
Break Out Force Bucket | 35 kN |
Break Out Force Lift Arm | 21.1 kN |
Length | 216.9" / 5508 mm |
Operating weight (min.-max.) | 8,196.8 - 10,901.9 lb / 3,718 - 4,945 kg |
Digging depth (max.) | 137.7" / 3,497 mm |
Width | 68.9" / 1,750 mm |
Height | 106.7" / 2,711 mm |
Cylinder | 3 |
Cylinder capacity | 100.2 cu in / 1,642 cc |
Effective power | 24.4 hp / 18.2 kW |
Nominal Engine speed | 2,400 1/min |
Battery capacity (nom. value) | 71 Ah |
Engine type | Diesel engine |
Exhaust-gas limit | EU Stage V |
Manufacturer | Yanmar |
Engine designation | 3TNV88 |
Operating pressure | 3,480 psi / 240 bar |
Flow rate max. | 31.7 gal/mi / 120 l/min |
Operating pressure slewing gear | 195 bar |
Hydraulikpump | Axial piston and 2 gear pumps |
Cooling fluid volume | 5.3 qt US / 5 l |
Hydraulic fluid volume | 65 qt US / 61.5 l |
Shipping weight | 7,780.1 lb |
Drive unit | Axialpistonmotor with RGU |
Height with cab | 101.3 inches / 2573 mm |
Height of dozer blade | 14.1 inches / 357 mm |
Total height with rotating beacon | 106.7 inches / 2711 mm |
Width of cab | 38.6 inches / 980 mm |
Width travel gear | 68.9 inches / 1750 mm |
Width of dozer blade | 68.9 inches / 1750 mm |
Transport length | 216.1 inches / 5489 mm |
Digging depth max., short shovel arm | 124.9 inches / 3172 mm |
Digging depth max., long shovel arm | 134.7 inches / 3422 mm |
Piercing depth max., short shovel arm | 80.6 inches / 2048 mm |
Piercing depth max., long shovel arm | 90.0 inches / 2285 mm |
Piercing height max., short shovel arm | 197.0 inches / 5004 mm |
Piercing height max., long shovel arm | 203.0 inches / 5157 mm |
Dumping height max., short shovel arm | 134.3 inches / 3411 mm |
Dumping height max., long shovel arm | 140.3 inches / 3564 mm |
Digging radius max., short shovel arm | 207.5 inches / 5270 mm |
Digging radius max., long shovel arm | 218.3 inches / 5546 mm |
Max. reach at ground level (short shovel arm) | 211.7 inches / 5378 mm |
Max. reach at ground level (long shovel arm) | 221.6 inches / 5629 mm |
Tail swing radius | 36.7 inches / 933 mm |
Boom offset max. (to center of bucket right side) | 26.8 inches / 680 mm |
Boom offset max. (to center of bucket left side) | 25.6 inches / 650 mm |
Stacking height max. (dozer blade above surface) | 15.5 inches / 393 mm |
Digging depth max. (dozer blade below surface) | 19.9 inches / 505 mm |
Length travel drive | 81.2 inches / 2062 mm |
Max. swivel angle (arm system to the left) | 10.7 inches / 271 mm |
Max. swivel angle (arm system to the right) | 15.4 inches / 390 mm |
Boom swing radius right | 63.3 inches / 1607 mm |
Boom swing radius left | 65 ° |
Max. swivel angle (arm system to the right) | 57 ° |