Tracked Skid Steer - Takeuchi

A rental product may not be available exactly as shown or listed. You may receive a rental product of similar specifications.
All prices subject to change without notice.

SKUSKI-220
4 Hours$241
Daily$290
Weekend * $348
Weekly$1,160
Monthly$3,480
Rental includes bucket or pallet fork attachment. $20 per day each extra bucket. 20% off trailer rental!
Daily Rates are for 8 hours runtime. Weekend Rates are for 12 hours runtime. Hourly rate charged over limit.

* Weekend = Sat - Mon 8AM

Takeuchi TL-8

Rubber tracks combine the capabilities of a track loader with the versatility of operation on improved surfaces
Pilot operated joystick
controls provide precise, fingertip control of loader and travel functions
USES 72" - 84" BUCKETS, SWEEPER, (SNOW BUCKETS 80" OR 90" )
PALLET FORKS (104-0221 )
AUGER DRIVE (101-0251)

Specifications

OPERATING PERFORMANCE
Operating Weight - Canopy8,455 lb / (3,835 kg)
Operating Weight - Cab8,631 lb / (3,915 kg)
Tipping Load6,020 lb / (2,731 kg)
Rated Operating Capacity, SAE J818*2,105 lb / (955 kg)
ROC w/ Optional Counter Weight2,323 lb / (1,054 kg)
Operating Load at 50% of Tipping Load3,010 lb / (1,365 kg)
Bucket Breakout Force6,856 lb / (3,110 kg)
Lift Arm Breakout Force6,709 lb / (3,100 kg)
Traction Force9,127 lb / (4,140 kg)
Ground Pressure - 15.7" Track4.4 psi / (30.2 kPa)
Ground Pressure - 12.6" Track5.4 psi / (37.2 kPa)
Travel Speed - Low4.6 mph / (7.4 km/hr)
Travel Speed - High6.8 mph / (11.0 km/hr)
HYDRAULIC SYSTEM
Auxiliary Flow - Primary Circuit18.4 gpm / (69.5 Lpm)
Auxiliary Flow - High Flow (optional)33.0 gpm / (124.9 Lpm)
Hydraulic System Pressure3,046 psi / (21.0 MPa)
ENGINE
Make / ModelKubota / V3307-CR-Turbo
Engine Displacement203 cu in / (3.3 L)
Horsepower @ 2,600 rpm74.3 hp / (55.4 kW)
Maximum Torque @ 1,500 rpm192 ft-lb / (260 Nm)
FLUID CAPACITIES
Engine Lubrication11.2 qt / (11.8 L)
Cooling System14.8 qt / (14.0 L)
Fuel Tank Capacity19.8 gal / (75.0 L)
Fuel Consumption (65% of Full Load)2.69 gal/hr / (10.2 L /hr)
Hydraulic Reservoir Capacity10.36 gal / (39.0 L)
Hydraulic System Capacity15.3 gal / (58.0 L)
Max. Lift Height to Bucket Pin9 ft 11 in / (3,030 mm)
Mid-Height Reach4 ft 6.3 in / (1,412 mm)
Overall Operating Height12 ft 9.7 in / (3,905 mm)
Dump Height Fully Raised7 ft 9.0 in / (2,370 mm)
Dump Reach Fully Raised2 ft 4.7 in / (730 mm)
Dump Angle38.5°
Rollback Angle30°
Track Ground Contact Length4 ft 6.7 in / (1,390 mm)
Machine Length8 ft 11.8 in / (2,740 mm)
Transport Length11 ft 3.0 in / (3,400 mm)
Transport Height6 ft 11.9 in / (2,130 mm)
Departure Angle30°
Clearance Circle with Bucket6 ft 10.0 in / (2,080 mm)
Clearance Circle without Bucket4 ft 6.0 in / (1,375 mm)
Clearance Circle Rear5 ft 2.4 in / (1,585 mm)
Track Width15.7 in / (400 mm)
Ground Clearance12.1 in / (310 mm)
Overall Width without Bucket5 ft 5.4 in / (1,660 mm)